Standard – fork arms

It is our ambition to manufacture the world's best fork arms. Due to our modular design it is possible to reinforce the fork spine to our desire and reduce bending and deflection by 30%.

  • ISO
  • Pin-guided forks
  • Roller-guided forks
  • Bolt-on fork
  • Individually suspensions
  • Standard forks
  • Fully tapered forks
  • Cranked forks
  • Individually tailored forks

Yes. We are able to produce forks with reinforced fork spines which reduces the deflection of the blade – for efficient and safe handling of goods.

We process high strength Hardox steel in the manufacturing of our fork arms. This is unique and offers higher strength and increased safety.

Fork spine and fork blade are joined by our patented technique using electron beam welding. Hereby we are able to combine different blades and spines. Therefore countless shapes and combinations of suspensions are possible.

Our production is innovative and differs from the „classic“ method of manufacturing a fork arm. Not only do you profit from our bespoke forks, also we can offer short shipping periods.

We produce in Austria in the heart of Europe and therefore for European customers there is no shipping overseas. Further, we offer a collection ex works.

A finite elements (FE) calculation graphically depicts tensions at a given load. Further the deflection of the fork due to the load is visualized. We provide a FE-calculation along with every delivered fork.

Examples standard forks

ISO Gabelzinke 1C

standard ISO suspension

ISO Gabelzinke 1C
Notice
This product example shows a standard fork with ISO suspension.

European quality forks with ISO-suspension feature a reinforced fork kink and 30% less deflection. 3-times safety and up to 3-times durability comes also as standard. The suspension elements are welded to the highest standard that is currently possible. EB welding of full sections in high vacuum.
ISO Gabelzinke 2C

reinforced fork spine ISO suspension

ISO Gabelzinke 2C
Notice
This product example shows a standard fork with reinforced spine.

Upon request we produce forks with reinforced spines. This is costly and difficult to produce with standard production methods. By our modular design we are able to reinforce the spine individually and reduce bending and deflection by 30%.
ISO Gabelzinke 3C

fully tapered fork ISO suspension

ISO Gabelzinke 3C
Notice
This product example shows a fully tapered standard fork with ISO suspension.

We produce fully tapered forks with extended widths up to 2,000 mm.
ISO Gabelzinke 4C

pin-guided fork

ISO Gabelzinke 4C
Notice
This product example shows a pin-guided standard fork.

The pin-guiding can be implemented singular or dual. The distance between the suspension elements meets a tolerance of 0.08 mm. The modular design enables us to produce very small tolerances. Further, we are able to combine every suspension types with every fork design. This results in a wide variety of forks.
ISO Gabelzinke 5C

bolt-on fork

ISO Gabelzinke 5C
Notice
This product example shows a standard fork with bolt-on spine.

Bolt-on spines do not require a reinforced spine to reduce deflection. We process a high strength material to match the same safety as forks with agitating spines.

Safety is paramount.
ISO Gabelzinke  6C

standard roller-guided

ISO Gabelzinke 6C
Notice
This product example shows a roller-guided standard fork.

We produce roller-guided forks of a nominal load up to 10 tons. The load distance is determined at 600 mm.

We offer a highly desirable value for money. If you value safety and quality, we serve your purpose. We provide high quality surfaces and narrow tolerances.

We provide the following technical data with our offer:

Furthermore, we provide a FE-calculation with every offer.
We are looking forward to your request!